NAVIGATE
RESOURCES
CHEATSHEETS
INFO
Search separating terms with a space; only alphanumeric characters are allowed.
Matches found for "Power Electronics"
What are bridges in electronics? Few words about one of the most simple circuital topology which can be used as DCDC converter, amplifier, motor driver, solenoid driver and so on!
Author: Vanadium - Last modified: 2021-08-19
Detailed analysis of the half-bridge topology, with schemes and calculations
Author: Vanadium - Last modified: 2021-08-19
Detailed analysis of the full-bridge topology, with schemes and calculations
Author: Vanadium - Last modified: 2021-08-19
Methods to reduce load ripple current and voltage at the output of a half-bridge
Author: Vanadium - Last modified: 2021-08-19
What is a linear regulator, pros and cons, internal scheme
Author: Vanadium - Last modified: 2023-01-08
Here, the simplest linear regulator is presented to start the analysis of such a type of device
Author: Vanadium - Last modified: 2023-01-08
Going from an ideal model to a more realistic one: analysis of the pass device in linear regulators
Author: Vanadium - Last modified: 2023-01-13
Analysis of the main parameters affecting the operating mode of a buck converter
Author: Vanadium - Last modified: 2023-06-02
DC model of the buck converter in CCM
Author: Vanadium - Last modified: 2023-06-02
Power dissipation calculations for a buck operating in CCM
Author: Vanadium - Last modified: 2023-06-02
Boost converter CCM and DCM analysis
Author: Vanadium - Last modified: 2023-06-02
Introduction to buck converter
Author: Vanadium - Last modified: 2023-06-02
AC small signal model for a generic buck regulator controlled in voltage mode (VMC)
Author: Vanadium - Last modified: 2023-06-02
AC small signal model for a generic buck regulator controlled in current mode (CMC)
Author: Vanadium - Last modified: 2023-06-02
What is Active Miller Clamp? In modern high-voltage systems, protection circuits are mandatory to ensure a high safety level of the product. Let's analyse this well-known feature and its hardware implementation.
Author: Vanadium - Last modified: 2024-02-11
Desaturation protection is a mechanism designed to prevent damage to power devices, such as IGBTs or MOSFETs, during of short-circuit or overload. Let's analyse the physics of these events and the circuital implementation of this protection.
Author: Vanadium - Last modified: 2024-02-11
There are many types of motors and control schemes but it's always difficult to understand which are the most suitable for every application. Let's clarify it and suggest the best combination for each of them.
Author: Vanadium - Last modified: 2025-03-21
Diode emulation mode in switching converters for low-voltage, high-current applications
Author: Vanadium - Last modified: 2024-09-25
3-phase 2-levels inverter model and power calculations
Author: Vanadium - Last modified: 2025-04-08
Linear model of a transformer, with analysis of parasitic elements
Author: Vanadium
Transmission lines - Part IV: Time domain
Usually, transmission lines are analysed in the frequency domain but, in some cases, it could be useful to do some calculation in the time domain. Let's see how this type of analysis is done.
Author: Vanadium
How to run a test-bench simulation with GHDL and analyse signals through GTKwave
Author: Vanadium
RMS values - also known as quadratic mean - calculated for different type of periodic waveform
Author: Vanadium
In an age dominated by digital technologies and rapid information exchange, the field of informatics stands as a cornerstone, weaving a tapestry that connects computing, data, and human interaction.
Author: Vanadium
Transmission lines - Part IX: Examples
Some numerical example for transmission lines
Author: Vanadium
A ready-to-use table of Laplace transforms, with properties and notable cases
Author: Vanadium
What is the Q factor of a capacitor and why it should be considered during early design stages
Author: Vanadium
Transmission lines - Part I: Introduction
How noise affects traces and planes on a PCB? How can very high-speed signals be used to transmit data? Which is the theory behind high-frequency design in communication systems? Transmission line is the answer to those questions!
Author: Vanadium
How to run LTSpice in batch mode and automate simulations and post-processing
Author: Vanadium